Delphi DS100E User Manual

39
13 Technical Problems.
If you receive this message opposite, Check the
Bluetooth configuration between the interface
and pocket PC.
Check on the screen that the Bluetooth
configuration and address is correct. If not
repeat the Bluetooth configuration outlined
above.
Also check that the battery is correctly charged.
To carry out a software reset press pen
into the hole in the base of the unit as
shown opposite.
Check that the battery is charged.

Delphi DS100E Specifications

General

Protocols	CAN, ISO9141, KWP2000, PWM, VPW
Connectivity	Bluetooth or USB
Operating System	Windows
Memory	Dependent on connected device
Operating Temperature	50°C