DELTA DORE TYBOX PAC - Timer Mode; Continuous Mode

- 7 -
Continuous mode
Choice of set-point
temperature
(from 5 to 30°C)
Set-point
temperature
Confirm
Modification
of the set-point
temperature
This mode is used to choose a set-point temperature
that remains constant.
Turn the knob to .
- 6 -
Timer mode
Set-point temperature setting
(from 5 to 30°C)
Confirm
Return to AUTO mode
at the end of the countdown
Confirm
To cancel the current mode ,
turn the knob.
To make changes to the current
mode , press OK once more.
This mode is used to choose a set-point temperature
for a given amount of time. Turn the knob to .
Adjustment of the duration from 15 minutes
to 72 hours (in increments of 15 minutes)
To exit this mode, turn the knob.