DELTA DORE TYBOX PAC - Choosing the HEAT; COOL mode and set-point temperature setting

- 10 -
Depending on the system configuration (menu 1-08),
“conf” may be displayed for the . set-point
temperature. This set-point temperature cannot be
modified. If this is the case, the Comfort set-point
temperature can be adjusted on your heat emitter
(radiator with thermostatically controlled valve, etc.).
Choosing the HEAT / COOL mode and
set-point temperature setting
Comfort set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
Go on to temperature setting
Economy
Economy set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
Confirm
Go on to temperature setting
Comfort
Selection of the operation mode
for the HEAT / COOL regulation
To exit this mode, turn the knob.
- 11 -
The comfort and economy set-point temperatures for
the HEAT mode are independent from the comfort and
economy set-point temperatures for the COOL mode.
Turn the knob to .
To set the heat mode, select the HEAT mode:
Comfort set-point temperature setting
(from 5 to 30°C in increments of 0.5°C)
Confirm
Go on to temperature setting
Economy
Economy set-point temperature
adjustment
(5 to 30°C in increments of 0.5°C)
Confirm
Confirm
Go on to temperature setting
Comfort
Selection of the operation mode for
the HEAT / COOL regulation
Turn the knob to .
To set the cool mode, select the COOL mode:
To exit this mode, turn the knob.