Programming
- 13 -
1. Choosing the HEAT / COOL mode
Turn the knob to .
Select the mode using + or - . Press OK to confirm.
2. Creating your program
Turn the knob to PROG.
The default program is:
- in HEAT mode: Comfort from 6:00 to 23:00
- in COOL mode: Comfort from 11:00 to 19:00
Programming starts on day 1 at midnight.
Press the or buttons to create different Economy
or Comfort periods.
Day
1st
Time slot
Comfort period
adjustment
Economy period
adjustment
Turn the knob to .
The days flash.
Press + or - to change the day, then press OK
to confirm and continue on to the next setting.
Repeat the operations to set the hours and minutes.
To leave the “time setting” mode, turn the knob.
Minutes
Hours
Days
(1 : Monday ...
7 : Sunday)
Time setting
- 12 -
NOTE:
If the unit is configured for a daily program,
the days setting is not offered.
The HEAT mode and the COOL mode are
independent.
Create a Comfort program and an Economy program
for each mode.
To Next Page
Loading...
