Delta 26-2240 User Manual

10-inch Sliding Compound Miter Saw
Scie à onglets composée coulissante 10 pouces
26-2240
Instruction Manual
Manual d’utilisation
Manual de instrucciones
Français (25)
Español (49)
To reduce the risk of serious injury, thoroughly read and comply with all warnings and instructions in this manual and on product
KEEP THIS MANUAL NEAR YOUR PRODUCT FOR EASY REFERENCE AND TO INSTRUCT OTHERS
Sierra de inglete compuesta deslizante de 10 pulgadas
www.DeltaMachinery.com

Delta 26-2240 Specifications

General

Brand	Delta
Model	26-2240
Category	Saw
Language	English

Summary

General Power Tool Safety Rules

Miter Saw Safety Rules

Power Connections

Features

Know Your Compound Miter Saw

Identifies and describes the various parts and features of the miter saw.

Mounting and Transportation

Preparations for Transportation

Steps to secure the saw for safe transport, including locking the head and slide.

Mounting Saw to Stable Surface

Instructions for securely mounting the saw to a workbench for safe operation.

Assembly

Install/Remove/Replace Blade

Step-by-step guide for safely changing the saw blade, including precautions.

Operation

Non-Sliding Cuts

Procedures for performing basic, non-sliding cuts with the miter saw.

For Bevel Cuts

Guidance on adjusting and making bevel cuts using the miter saw.

Slide Cuts

For Cross Cuts

Specific instructions for making standard cross cuts using the miter saw.

For Compound Miter Cuts

For Miter Cuts

Steps for setting up and performing miter cuts accurately on the saw.

Adjustments

Align the Blade to Table

Procedure for ensuring the blade is perfectly perpendicular to the saw table.

Depth Stop Adjustment

Align the Blade to Fence

Steps to ensure the blade is parallel to the saw fence for accurate cuts.

Maintenance

Brush Replacement

Troubleshooting

Failure to Start