27
Chapter 6 Installation
2
Follow steps
1
to
4
to install the UPS in Delta’s rail kit (optional). See Figure
6-2.
Step
1
: Adjust the length of the rail according to the rack.
Step
2
: Tighten the nuts.
Step
3
: Fix the rail on the rack.
Step
4
: Insert the UPS in the rack and tighten the screws.
3
If you want to use a non-Delta rail kit, please only follow step
4
.
BATTERY PACK
ESC
1
2
3
4
(Figure 6-2: Rack Mounting)
NOTE :
If you need the optional rail kit, please contact your local dealer.
To Next Page
Loading...
