Delta Amplon Series - Control Menu

54
Amplon RT Series
9.2.3 Control Menu
In Main Menu, after selecting
Control
, press the button
to enter into the Control
Menu.
Measurement
Control
Setting
Maintenance
Output
Charger
Alarm
The Control Menu provides commands for enabling specic UPS functions. Please
refer to the table below for the setup items and selectable values.
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 LEVEL 5
Control
Output
Outlet Group 1
Output Reboot
Immediately
Yes/ No
Output Reboot
With Delay
Yes/ No
Bypass*
1
Go into Bypass Yes/ No
Go out of Bypass Yes/ No
Charger
Execute Boost
Charge
Yes/ No
Alarm
Clear Prediction
Warning*
2
Yes/ No
NOTE :
1. *
1
: The item Bypass will be hidden if you set the Standby Mode as
Bypass Output. To set up Bypass Output, please go to
Setting
→ Output
→ Standby Mode → Bypass Output.
2. *
2
: The item Delay Alarm Again under Control → Alarm → Clear
Prediction Warning can be set from 1 week to 52 weeks.
For example, if you need the UPS to reboot the output immediately, please go to
Control
→ Output → Outlet Group 1 → Output Reboot Immediately → Yes.