Delta Amplon Series - Installation; 6.1 Rack Mounting

26
Amplon RT Series
Chapter 6 : Installation
Please refer to the system block diagram and related information below for correct
installation.
A2D&D2D Inverter
Output load 1
CHG
Inverter relay
Bypass
Output relay
Input relay
Output load 2
Input
EMI
Output
EMI
Aux
Power
Internal
Battery
Pack
External
Battery
Pack
Control
Board
Communication
Board
LCD
Board
To A2D/D2D
To inverter
To charger
I/P
6.1 Rack Mounting
Use the included bracket ears and screws to mount the UPS in a rack by following
the procedures below.
1
Attach the included bracket ears to the lateral mounting holes of the UPS. See
Figure 6-1.
ESC
BATTERY PACK
(Figure 6-1: UPS Bracket Ear Installation)