ASDA-A2  Chapter 11 Specifications 
11-22      Revision February, 2017 
Operating temperature (
o
C) 
20% to 90% RH (non-condensing) 
20% to 90% RH (non-condensing) 
IP65 (use the waterproof connector and shaft seal 
installation (or oil seal) model) 
 
Note: 
*1  The rated torque is the continuous permissible torque between 0~40˚C operating temperature 
which is suitable for the following heat sink dimension. 
  ECMA-__08 : 250 mm x 250 mm x 6 mm 
  ECMA-__13 : 400 mm x 400 mm x 20 mm 
  ECMA-__18 : 550 mm x 550 mm x 30 mm 
          ECMA-__22: 650 mm x 650 mm x 35 mm 
  Material type: Aluminum – F80, F130, F180, F220 
*2  The built-in brake of the servo motor is for remaining the item in stop status. Do not use it to 
decelerate or as the dynamic brake.