Delta ASD-A2 Series User Manual

Chapter 4 Panel Display and Operation ASDA-A2
Revision February, 2017 4-9
4.4 General Function
4.4.1 Operation of Fault Record Display
When it is in Parameter Mode, select P4-00~P4-04 and press the SET Key, the corresponding
fault record will be shown
.

Delta ASD-A2 Series Specifications

General

Control Mode	Position, Speed, Torque
Feedback	Incremental encoder, Absolute encoder
Rated Output Power	0.1 kW to 15 kW
Power Supply	200-230V AC
Communication Interface	RS-485, CANopen
Protection Features	Overload, Overvoltage, Overcurrent, Overheat