Delta RPI M30A User Manual

5.2.8.4. Constant cosphi
Inverter can feed in a fixed reactive power to grid. Users can set the power
factor(cosphi) in Constant cosphi page.
5.2.8.5. Cosphi (P)
Cosphi (P) is a function that inverter will feed in reactive power when its
output active power reach the setting values. For country Italy MV and
Italy LV, users can set lock-in voltage and lock-out voltage to assign the
operation interval. When grid voltage reach the lock-in voltage(V lock-in),
inverter will enable cosphi (P) function automatically and disabled it when
grid voltage reach lock-out voltage(V lock-out).
►
Constant cosphi
Cosphi (P)
Constant Q
Q(V)
ENT
EXIT
Mode
cosphi
►
OFF
Ind 1.00
Figure 5-23 Constant cosphi page
Figure 5-24 Cosphi (P) page
►
Constant cosphi
Cosphi (P)
Constant Q
Q(V)
ENT
EXIT
EXIT
Mode
Q upper
P lower
Q lower
►
OFF
Ind 1.00
45%
Ind 0.90
P upper
V lock-in
V lock-out
►
90%
241.5V
230.0V
Q upper
Q lower
P/Pn
1
cosφ
P lower P upper
Figure 5-24 Cosphi (P) page
52
Turn on PV inverter

Delta RPI M30A Specifications

General

Brand	Delta
Model	RPI M30A
Category	Inverter
Language	English