14
Amplon RT Series
UPS Turn-off
In online mode, press the ‘OFF’ button for 3 seconds to shut down the inverter (the system will beep) and
the UPS will transfer to bypass mode. At this moment, the bypass LED
illuminates (yellow) and
the LCD shows ‘BYPASS MODE’. In backup mode, press the ‘OFF” button for 3 seconds to shut down
the inverter (the system will beep) and the UPS turns off and the LCD shows the following message.
WARNING:
You can remove the UPS only after the above message is off, the fan(s) stops running, the util-
ity power is shut off and the batteries are removed.
LCD Display in Different Operation Modes
In different operation modes, the LCD will display different information.
NOTE:
ÚPlease use the UP “ ” and DOWN “ ” buttons on the front
control panel to switch back and forth between screens.
Ú
The UPS supports multi-language LCD display. If you need to
change the default language setting, please contact your lo-
cal dealer or customer service.
To Next Page
Loading...
Need help?
General