Delta VFD007FP4EA-41 - Page 139

Chapter 10 Digital Keypad|CFP2000
10-7
Begin to copy parameters until it is done.
Once copying parameters is done, keypad
will automatically be back to this screen.
Example: Saved in the keypad.
1. Once copying parameters is done, keypad
will automatically be back to this screen.
2. Select the parameter group which needs to
be copied and press ENTER key.
Press ENTER key to go to “Save in the moto
r
drive” screen.
Use Up/Down key to select a symbol.
Use Left/Right key to move the cursor to
select a file name.
String & Symbol Table:
！＂＃＄％＆＇（）＊＋，－．／０１２３４５６７８９：；＜＝
＞？＠ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶＷＸＹＺ
［＼］＾＿｀ａｂｃｄｆｇｈｉｊｋｌｍｎｏｐｑｒｓｔｕｖｗｘ
ｙｚ｛｜｝～
Once the file name is confirmed, press
ENTER key.
To begin copying parameters until it is done.
When copying parameters is completed,
keypad will automatically be back to this
screen.
Press Right key to see the date of copying
parameters.
Press Right key to see the time of copying
parameters.