Delta VFD007FP4EA-41 - Page 143

Chapter 10 Digital Keypad|CFP2000
10-11
7. Quick Start
Press ENTER key to select.
Quick Start:
1. V/F Mode
2. VFPG Mode
3. SVC Mode
4. FOCPG Mode
5. TQCPG Mode
6. My Mode
Description: PG mode is only applicable on C2000/ CH2000 series.
1. VF Mode
01:Password Decoder
Items
1. Parameter Protection Password Input
(P00-07)
2. Parameter Protection Password Setting
(P00-08)
3. Control Mode (P00-10)
4. Control of Speed Mode (P00-11)
5. Load Selection (P00-16)
6. Source of the Master Frequency
Command (AUTO) (P00-20)
7. Source of the Operation Command
(AUTO) (P00-21)
8. Stop Method (P00-22)
9. Digital Keypad STOP function (P00-32)
10. Max. Operation Frequency (P01-00)
11. Base Frequency of Motor 1 (P01-01)
12. Max. Output Voltage Setting of Motor 1
(P01-02)
13. Min. Output Frequency of Motor 1
(P01-07)
14. Min. Output Voltage of Motor 1 (P01-08)
15. Output Frequency Upper Limit (P01-10)
16. Output Frequency Lower Limit (P01-11)
17. Accel. Time 1 (P01-12)
18. Decel Time 1 (P01-13)
19. Over-voltage Stall Prevention (P06-01)
20. Software Brake Level (P07-00)
21. Filter Time of Torque Command
(P07-24)
22. Filter Time of Slip Compensation
(P07-25)
23. Slip Compensation Gain (P07-27)
2. VFPG Mode
01: Password Decoder
Items
1. Parameter Protection Password Input
(P00-07)
2. Parameter Protection Password
Setting (P00-08)
3. Control Mode (P00-10)
4. Control of Speed Mode (P00-11)
5. Load Selection (P00-16)
6. Source of the Master Frequency
Command (AUTO) (P00-20)
7. Source of the Operation Command
(AUTO) (P00-21)
8. Stop Method (P00-22)
9. Digital Keypad STOP function (P00-32)
10. Max. Operation Frequency (P01-00)
11. Base Frequency of Motor 1 (P01-01)
12. Max. Output Voltage Setting of Motor 1
(P01-02)
13. Min. Output Frequency of Motor 1
(P01-07)
14. Min. Output Voltage of Motor 1
(P01-08)
15. Output Frequency Upper Limit
(P01-10)
16. Output Frequency Lower Limit
(P01-11)
17. Accel. Time 1 (P01-12)