Delta VFD220VL43C-J User Manual

Chapter 4 Description of Parameters | VFD-VJ
4-21
4-2 Description of Parameter Settings
00 System Parameters  You can set this parameter during operation.
Hybrid servo drive model code ID
Control mode
VF FOCPG
FOCPM
Factory setting: Read only
Settings Read only
Display of rated current of the hybrid servo drive
Control mode
VF FOCPG
FOCPM
Factory setting: Read only
Settings Read only
 Pr.00-00 is to determine the capacity of the hybrid servo motor, which has been configured in this
parameter in factory. In addition, the current value of Pr.00-01 can be read out to check if it is the rated
current of the corresponding model.
Display value of the current value of Pr.00-01 for the related Pr.00-00.
230V Models
Power (KW)
5.5 7.5 11 15 18.5 22 30 37
Horse Power (HP)
7.5 10 15 20 25 30 40 50
Model ID
12 14 16 18 20 22 214 215
460V Models
Power (KW)
5.5 7.5 11 15 18.5 22 30 37 45 55 75
Horse Power (HP)
7.5 10 15 20 25 30 40 50 60 75 100
Model ID
13 15 410 411 412 413 414 415 416 417 418
Reset parameter settings
Control mode
VF FOCPG FOCPM
Factory setting: 0
Settings
0: No function
1: Parameter Locked
5: Rest the kWh at drive stop
7: Reset CANopen index
10: Reset all the parameters to factory setting
 .
Software version
Control mode
VF FOCPG FOCPM
Factory setting: #. ##
Settings
Read only

Selection of multi-function display
Control mode
VF FOCPG FOCPM
Factory setting: 0
Settings 0: Display the output current (A)
U
1: Reserved
2: Display the actual output frequency (H) (unit: Hz)
U
3: Display the DC bus voltage (U) (unit: V)
U
4: Display the three-phase U, V, W output voltage (E) (unit: V)
U

Delta VFD220VL43C-J Specifications

General

Brand	Delta
Model	VFD220VL43C-J
Category	Servo Drives
Language	English