Operating MATRIX control panel MATRIX control panel
38 PR-2011-0110-GB • Subject to modifications • R9-03-2016
7.5 “Setpoint room temperature” menu
(basic display 1 – alternatively to basic display 2)
You can change the setpoint value for the room temperature in the menu "Set-
point room temperature".
The setpoint temperature is displayed depending on the setting(See "Submenu
temperature unit" on page 56) in:
– degrees Celsius (°C) with an interval of 0.5 degrees or
– degrees Fahrenheit (°F) with an interval of 1 degree
You can change the room temperature setpoint in this menu for the
current operating mode:
• Change the room temperature setpoint as described in "Changing values" on
page 34.
9 The “YES” field is now highlighted in black.
• Press the “SET” button to delete the week program with all switching times.
• By pressing the "ESC" button you can always cancel the menu selection.
Delete program
Really delete?
YES
NO
NOTICE!
The menus "Setpoint room temperature" and "Setpoint supply-air temperature"
are displayed depending on the configuration of the connected controller.
The selection is made automatically.
Symbol Explanation
Icon for setpoint room temperature
Value range
Factory setting
Set room temperature setpoint in
degrees Celsius or degrees Fahrenheit.
7 °C to 40 °C
Normal operation: 22 °C
Economy operation: 18 °C
Factory setting
Set temperature unit in
degrees Celsius
or
degrees Fahrenheit
°C
To Next Page
