Denon AVR-1312 Getting Started

4
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS ESPAÑOL NEDERLANDS SVENSKA
Connect this unit to the television using an HDMI cable
(sold separately)
When a device supporting Deep Color signal transfer is connected, use a cable compatible
“High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
)%.**/
1
4
Turn the television and subwoofer power on, and
switch the video input to this unit (HDMI input)
For details on how to operate the television and subwoofer , see the television and subwoofer
instruction manual.
q Power on
w Power on
e Switch the input to this unit (HDMI input)
2
Insert the main unit power plug into the wall socket
To household power outlet
(AC 120 V, 60 Hz)
Power cord
3
Insert the provided batteries into the remote control unit
q Remove the rear lid in the direction of the
arrow and remove it.
w Load the two batteries properly as indicated by
the marks in the battery compartment.
R03/AAA
e Put the rear cover back on.
4
Turn on power to the unit
The power indicator fl ashes green and the power turns on.
Press ON ( Z )
You can also switch the power to standby by
pressing
ON/STANDBY on the main unit.
5
Before setting up the speakers
1AVR1312E3ENGIMGS0033rd110120.inddSec:4 2011/01/2111:12:44

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)