EasyManuals Logo

Denon AVR-2105 Operating Instructions

Denon AVR-2105
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
NOTE:
When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and
the setting will be completed.
9
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
6
Select the various parameters. (See “Surround parameters q” for a description of the various parameters.)
SURROUND
PARAMETER
(Main unit) (Remote control unit)
7
Set the various surround parameters.
SELECT
(Main unit) (Remote control unit)
8
When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The
settings are automatically finalized and the normal display reappears after several seconds.
(Remote control unit)
5
Select the optimum mode for the source.
SELECT
(Main unit) (Remote control unit)
When the “SB CH OUT” parameter is set to “ON”. (Set “S. BACK” at system set up to
“SMALL” or “LARGE”.)
(Pro Logic IIx
Cinema mode)
(Pro Logic IIx
Music mode)
(Pro Logic IIx
Game mode)
or
or
When the “SB CH OUT” parameter is set to “OFF”. (Set “S. BACK” at system set up to
“NONE”.)
(Pro Logic II
Cinema mode)
(Pro Logic
II
Music mode)
(Pro Logic
II
Game mode)
or
or
(Dolby Pro Logic
mode)
51
ENGLISH

Other manuals for Denon AVR-2105

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-2105 and is the answer not in the manual?

Denon AVR-2105 Specifications

General IconGeneral
Power Output90 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Number of Channels7.1
Component Video Inputs3
AM/FM TunerYes
Response Bandwidth10 Hz - 100 kHz
Signal-To-Noise Ratio102 dB
THD0.08%
Input Impedance47 kOhm
Input Sensitivity200 mV
Tuner BandsAM/FM
Digital Sound Processor (DSP)Yes
HDMI SwitchingNo
Video Conversion/ScalingNo
Output Impedance / Channel8 ohm
Frequency Response10 Hz - 100 kHz
Total Harmonic Distortion0.08%
Dolby DecodingDolby Digital, Dolby Pro Logic II
DTS DecodingDTS, DTS Neo:6
Digital Audio Inputs2 coaxial, 5 optical
Audio D/A Converter24bit / 192kHz
Tuner Frequency RangeAM: 522 - 1611kHz, FM: 87.5 - 108MHz
Dimensions (W x H x D)434 x 171 x 377 mm
Output Power / Channel90W (8 ohms, 20Hz-20kHz, 0.08% THD)

Related product manuals