Denon AVR-4520CI User Manual

147
Information
Display network information.
Setting details
Friendly Name / DHCP On or Off / IP Address / MAC Address
MAC Address is required to make a vTuner account.
Network
Default settings are underlined.
Enables network communication in standby power mode.
Setting details
Off In Standby : Suspend network function during standby.
Always On : Network is on during standby. Main unit operable with a network compatible controller.
•Set to “Always On” when using the web control function.
•With the “Always On” setting, you can use each NETWORK connector as the hub even while power
to this unit is set to standby.
NOTE
When “Network” is set to “Always On”, it consumes more standby power.
Network
Friendly Name
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name
according to your preferences.
Setting items Setting details
Edit Name
Edits Friendly Name.
•The default Friendly Name on first use is “DENON AVR-4520CI”.
•Up to 63 characters can be input.
•For character input, see page118.
Set Defaults
Restores Friendly Name,
which you had changed, to
the default setting.
Reset : Reset to the defaults.
Cancel : Do not reset to the defaults.
When you select “Set Defaults” and press
ENTER, the “Reset the friendly name back
to the factory default?” prompt is displayed.
Select either “Reset” or “Cancel”, and press
ENTER.
Basic version
Advanced version
Informations
Advanced version
DVD

Denon AVR-4520CI Specifications

General

Brand	Denon
Model	AVR-4520CI
Category	Receiver
Language	English