Denon AVR-887 User Manual

PageDefault settingsItems
PageDefault settingsItems
ENGLISH
46
ENGLISH
Advanced Setup – Part 1 Advanced Setup – Part 1
4. Video Setup
2
Component In
Assignment
53
3Video Convert
ON
54
Audio Delay5
0 ms
55
On Screen
Display
6
Function/Mode = ON
Master Volume = ON
Mode = Mode 1
55
3. Audio Input Setup
49
Digital In
Assignment
Digital
Inputs
Input
source
CD DVD / VDP TV / DBS VCR-1
1
CDR / TAPE
2
EXT. IN
Subwoofer
Level
SW Level = +15 dB
50
Input Function
Level
PHONO CDTUNER
CDR /
TAPE
DVD /
VDP
0 dB 0 dB0 dB 0 dB 0 dB
4
TV /
DBS
0 dB
5
Function
Rename
51
6Tuner Presets
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Auto Preset
Memory
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
Preset Skip
Preset
Name
51
All preset channels = ON
52
–
52
50
iPod
Assignment
It is possible to assign the Control Dock for iPod’s (ASD-1R, sold separately)
audio and/or video signals to any input terminals on the AVR-887 and play
them.
iPod Function = OFF
50
3
This assigns the digital input terminals for the different
input sources.
Sets the playback level of the analog signal that was input to the EXT. IN
subwoofer terminal.
Up to 56 FM stations can be preset automatically.
The playback level is corrected individually for the different input sources.
The name of the input function that is displayed can be changed.
Preset channels that are not used often can be skipped.
The preset channels can be given the names you want.
This assigns the component video input terminals for the different input
sources.
This sets whether or not to use the video conversion function.
Adjust the time delay between the video and audio signals.
Set whether or not to display the on screen display for indications other
than the menu screens.
V. AUX
VCR-1 VCR-2 V. AUX
0 dB 0 dB 0 dB
PHONO CDTUNER
CDR /
TAPE
DVD /
VDP
TV /
DBS
VCR-1 VCR-2 V. AUX
53
HDMI In
Assignment
1
The HDMI input terminals are assigned for the different input sources.
Select the HDMI audio signal playback method.
HDMI Out
Setup
4
OFF
54
Set whether or not to up-convert from analog video signals to HDMI.
When this function is used, the format of the signal output from the
HDMI terminal can be set.
DVD / VDP TV / DBS VCR-1 VCR-2 V. AUX
1-RCA 2-RCA 3-RCA NONE NONE
DVD / VDP TV / DBS VCR-1 VCR-2 V. AUX
NONE NONE NONE NONE NONE
VCR-2
COAX 1 OPT 1 OPT 2 COAX 2 OPT 3 OPT 4OFF

Denon AVR-887 Specifications

Power

rated output front	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output front alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output center	100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output center alternative	135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
rated output surround back	100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)
rated output surround back alternative	135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)
power supply	AC 120 V, 60 Hz
power consumption	5.5 A

Audio Inputs and Outputs

analog inputs	9 sets
analog ext inputs	8
digital inputs optical	4
digital inputs coaxial	2
audio delay function	0 - 200 msec.
variable subwoofer crossover	40/60/80/90/100/110/120/150/200/250 Hz

Video Inputs and Outputs

component video inputs	3 sets
composite inputs	5
s-video inputs	5
component video outputs	1 set
composite outputs	3
s-video outputs	3

Audio Performance

frequency response	10 Hz - 100 kHz (+1, -3 dB)
signal-to-noise ratio	100 dB (IHF-A weighted)
tone control treble	±6 dB at 10 kHz
tone control bass	±6 dB at 100 Hz

Weight and Dimensions

dimensions	17-3/32” (W) x 6-47/64” (H) x 16-27/64” (D)
dimensions metric	434 (W) x 171 (H) x 417 (D) mm
weight	29 lbs 5 oz
weight metric	13.0 kg