Denon AVR-891 - How to Make Detailed Settings; Menu Map

41
ENGLISH
Basic versionSimple version InformationAdvanced version
Menu map
For menu operation, connect a TV to this unit and
display the menu on the TV screen. For menu
operations, see the following page.
How to make detailed settings
Setting items Detailed items Description Page
1. Audio/Video Adjust
Adjust various audio parameters
Audio Adjust
Picture Adjust
AUDIO/VIDEO ADJUST
Audio Adjust Adjust various audio parameters. 50
Picture Adjust Adjust the picture quality. 54
2. Information
Shows information about current settings
Status
Audio Input Signal
HDMI Information
Auto Surround Mode
Quick Select
Preset Channel
INFORMATION
Status Shows information about current settings. 62
Audio Input Signal Shows information about audio input signals. 62
HDMI Information Displays the HDMI input/output signals and HDMI monitor information. 62
Auto Surround Mode Displays the settings stored for the auto surround mode. 62
Quick Select Displays the settings stored for the Quick Select function. 62
Preset Channel Shows information about tuner preset channels. 62
3. Auto Setup
Optimize settings for speakers in use
Audyssey Auto Setup
Parameter Check
AUTO SETUP
Audyssey
®
Auto Setup Makes the optimum settings for the speakers being used automatically. 6
Parameter Check Check Audyssey Auto Setup measurement results.
This item is only displayed after Audyssey Auto Setup procedure has been
performed.
10
4. Manual Setup
Make detailed speaker settings
Speaker Setup
HDMI Setup
Audio Setup
ZONE2 Setup
Option Setup
MANUAL SETUP
Speaker Setup Sets the speaker size and distance, the channel level, etc. 55
HDMI Setup Make settings for HDMI video/audio output. 58
Audio Setup Make settings for audio playback. 59
ZONE2 Setup Make settings for audio playback in a ZONE2 system. 60
Option Setup Make various other settings. 60
5. Input Setup Auto Preset Use the auto preset function to program radio stations. 45
Preset Skip Set the preset memories that you do not want to display when tuning. 45
Preset Name Assign name to a preset memory. 46
Input Assign Change input connector assignment. 46
Video Makes the video settings. 47
Input Mode Sets the audio input mode and decode mode. 48
Rename Change the display name for this source. 48
Source Level Adjust the playback level of the audio input. 49
Playback Mode Make settings for iPod or USB memory device playback. 49
Displayed items of the “Input Setup” menu differs,
depending on the selected input source.
Adjust various audio and video parameters
Audio/Video Adjust
Information
Auto Setup
Manual Setup
Input Setup
MENU
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.