Denon AVR-S730H Troubleshooting Guide

Control Keys for Navigation
You can operate each menu using the Cursors, Enter and Back buttons on the remote control or the main unit.
In the case of models that there is no cursor button on the main unit, the following buttons will work as the cursor buttons during HDMI Diagnostics mode.
RC buttons
Main unit buttons
AVR-S730H
AVR-S930H
AVR-X1400H
AVR-X2400H
Up TUNE + ZONE2 SOURCE
Down TUNE - ZONE2 ON/OFF
Left TUNER PRESET CH - TUNER PRESET CH -
Right TUNER PRESET CH + TUNER PRESET CH +
ENTER DIMMER DIMMER
BACK STATUS STATUS
To exit HDMI DIAGNOSTICS Mode
To exit the HDMI Diagnostics mode, please select "7 Exit" or turn off the AV Receiver.
NOTE
0
The HDMI DIAGNOSTICS feature does not support ZONE2 related Video and Audio issues.
Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting
7

Denon AVR-S730H Specifications

General

Channels	7.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	110W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)	165W
HDMI Inputs	6
HDMI Outputs	1
Dolby Atmos	Yes
DTS:X	Yes
DTS Virtual:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Multi-room	Yes
4K Ultra HD Pass-through	Yes
HDR Support	Yes (HDR10, Dolby Vision, HLG)
Auto Speaker Calibration	Audyssey MultEQ
AirPlay	Yes (AirPlay 2)
Internet Radio	Yes
Phono Input	No
Ethernet Port	Yes
Power Output per Channel	75W (8 ohm, 20Hz-20kHz, 0.08% 2ch Drive)
USB Input	1 (Front)