Name: Denon AVR-S730H
Brand: Denon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Save logs or EDID information on a USB memory device or our server via the network.

This menu is for developers. Please use it only when requested by customer service.

Use a USB memory device formatted to FAT32 format.

Check the network connection in advance before saving a log on the network server.

Procedure

Use ui to select "6 Log/EDID" in the HDMI Diagnostics mode,

then press ENTER.

6 Log/EDID

When saving a log to a USB Memory Device, connect the USB

Memory Device to the AV receiver, select “Start” and press the

ENTER button.

Log/EDID

–Start

Blink

When saving a log to the server via the network, select “Start” without connecting a

USB.

When saving the log to the USB memory device is complete,

“USB SUCCESS” is displayed on the front display.

(Example log file name: “logs-xxxxxxxxxx.tar.gz”)

USB SUCCESS

–Exit

Blink

When saving the log via the network is complete, a 5-digit ticket number is

displayed on the front panel display. Take a note of this number as you will need it

when contacting the customer center.

Ticket No:xxxxx

–Exit

Blink

Select “Exit” and press the ENTER button. Return to the HDMI

DIAGNOSTICS menu.

Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting

Other manuals for Denon AVR-S730H

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-S730H and is the answer not in the manual?

General