Name: Denon AVR-S730H
Brand: Denon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Procedure (Max Resolution)

When the TV doesn't play a video's content (4K), there are two approaches to this

issue.

1. To change to a new HDMI cable.

2. To set the limit mode (Max Resolution). As a result, the player outputs a lower

resolution.

Video Content(4K)

No Picture

Use ui to select "5 Limit Mode" in the HDMI DIAGNOSTICS

mode, then press ENTER.

5 Limit Mode

Use ui to select "2 MaxRes:***", then press ENTER.

(“***” indicates the currently set backup information. In the example shown,

“4K(3G)” is displayed.)

2 MaxRes:4K(3G)

Select the maximum resolution to be set and press the ENTER

button.

(In the example shown the setting is changed from “4K(3G)” to “1080p”. “*”

indicates the currently set backup information.)

The AV Receiver limits the Input Resolution by changing the EDID.

–*1080p

Check whether the video is output.

Video Content (1080p)

Introduction How to operate Cable Test Limit mode Log & EDID Troubleshooting

Other manuals for Denon AVR-S730H

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-S730H and is the answer not in the manual?

General