Name: Denon AVR-S900W
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Move the Sound calibration microphone to position 2,

select “Continue”, then press ENTER.

The measurement of the second position starts.

Measurements can be made in up to six positions.

Complete

Continue

Place the microphone ear level at the 2nd listening position,

which should be no more than 2 ft (60cm) away from the 1st

position, then select “Continue”...

Speaker Calibration

Back

Ear Height

To skip measuring the second and subsequent listening position, press o to

select “Complete” and press ENTER to proceed to step 11.

Stopping Audyssey

Setup

Press BACK to display the popup screen.

Press o to select “Yes”, then press ENTER.

Repeat step 8, measuring positions 3 to 6.

Select “Complete”, then press ENTER.

Audyssey Setup

Continue

Repeat Last Test

Measurements complete.

Select Continue to analyze the data...

Start the analysis and storage of the measurement results.

Analysis takes several minutes to complete.

The more speakers and measurement positions that there are,

the more time it takes to perform the analysis.

NOTE

When the measurement results are being saved, make sure the power is not

turned off.

Contents Connections Playback Settings Tips Appendix

173

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S900W

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-S900W and is the answer not in the manual?

General