Denon AVR-X4200W - Hdmi;DVI

YES
YES
YES
YES
NO
NO
NO
NO
NO
YES
YES
No picture or sound is output.
Check the Blu-ray/DVD player.
Check the connection of the HDMI/DVI cable.
(1) Is the HDMI/DVI cable correctly inserted?
(3) Is a certied HDMI cable (with the HDMI mark) being used?
(4) Is the HDMI/DVI cable shorter than 5m?
(5) When the input signal is Deep Color or 4K, are you using a "
High
speed HDMI cable with Ethernet
" or "
High speed cable
" that
bears the HDMI logo?
(6) Are a picture and sound output when a different HDMI/DVI cable
is used?
(2) Is an HDMI/DVI selector, repeater or image quality improvement
device being used?
(7) Are the HDMI output settings of the Blu-ray/DVD player correct?
(9) Are a picture and sound output when the
resolution of the Blu-ray/DVD player is
changed?
(8) When using a DENON Blu-ray/DVD player, is the "HDMI" indicator
of the uorescent display lit?
Proceed to YES when using a Blu-ray/DVD player produced by
other manufactures.
(10) Is sound output from the speaker terminal of this unit when the
power of the TV is turned off or the cable connecting the TV to
this unit is removed?
Check the connection of the HDMI/DVI cable.
Use a certied HDMI cable (with the HDMI mark).
Replace the HDMI/DVI cable with the one shorter
than 5m (2m is recommended) and check again.
Use an "
High speed HDMI cable with Ethernet
" or
"
High speed cable
" that comes with the HDMI logo.
The HDMI/DVI cable is faulty.
Remove all of these and connect only the HDMI/DVI
cable.
Check the instruction manual of the Blu-ray/DVD
player and set the HDMI output correctly.
Set the output resolution of the Blu-ray/DVD player
to the resolution supported by the TV.
The Blu-ray/DVD player may not support the HDCP
repeater function.
Refer to the manufacturer of the Blu-ray/DVD player.
NO
NO
NO
NO
YES
NO
YES
YES
YES
3. HDMI/DVI
3.1. No picture or sound is output (HDMI to HDMI)
105