Denon AVR-X4200W - Surround Modes and Parameters

SURROUND MODES AND PARAMETERS
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v
p. 237)
Sound mode
Channel output
Front
L/R
Center
Surround
L/R
Surround
Back
L/R
Front
Wide
L/R
Front
Height
L/R
Top Front
L/R
Top
Middle
L/R
Top Rear
L/R
Rear
Height
L/R
Front
Dolby
Atmos
Enabled
L/R
Surround
Dolby
Atmos
Enabled
L/R
Back
Dolby
Atmos
Enabled
L/R
Subwoofer
Direct/Pure Direct (2-channel)
S Dz7
Direct/Pure Direct (Multi-channel)
SDDDz3 Dz3 Dz3 Dz3 Dz3 Dz3 Dz3 Dz3 Dz3 Dz3 D
DSD Direct (2-channel)
S Dz7
DSD Direct (Multi-channel)
SDD D
Stereo
S D
Multi Ch In
SDDDz3 D
Dolby Surround z1 SDDDz4
DDDDDDDD D
DTS Neural:X z2
SDDDDDDDDDDDD D
Audyssey DSX®
SDD Dz6 Dz6 D
Dolby Digital
SDD D
Dolby Digital Plus
SDDDz3 Dz3 Dz3 D
Dolby TrueHD
SDDDz3 Dz3 Dz3 D
Dolby Atmos
SDDDDDDDDDDDD D
DTS Surround
SDDD D
DTS 96/24
SDDD D
DTS-HD
SDDDz3 Dz3 Dz3 D
DTS Express
SDDD D
DTS:X
SDDDDDDDDDDDD D
Multi Ch Stereo
SDDDz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 D
Rock Arena
SDDDz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 D
Jazz Club
SDDDz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 D
Mono Movie
SDDDz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 D
Video Game
SDDDz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 D
Matrix
SDDDz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 Dz5 D
Virtual
S D
Contents Connections Playback Settings Tips Appendix
310
Front panel Display Rear panel Remote Index
Upgrade (Auro-3D)
Sound mode
Channel output
Front
L/R
Center
Surround
L/R
Surround
Back
L/R
Front
Wide
L/R
Front
Height
L/R
Top Front
L/R
Top Middle
L/R
Top Rear
L/R
Rear
Height
L/R
Surround
Height
L/R
Front
Dolby
Atmos
Enabled
L/R
Surround
Dolby
Atmos
Enabled
L/R
Back Dolby
Atmos
Enabled
L/R
Subwoofer
Auro-3D
SDD D Dz8
DD
Auro-2D Surround
SDD D D
z1
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z2
The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.
z3
A signal for each channel contained in an input signal is output as audio.
z4 Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v
p. 238)
z5 Audio is output from the speakers specified in the “Surround Parameter” – “Speaker Select” settings. (v
p. 191)
z6
Audio is output from the speakers specified in the “Audyssey DSX
®
” settings. (v p. 197)
z7 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 245)
z8
You can use the Rear Height speakers instead of Surround Height speakers for Auro-3D playback. For best Auro-3D experience, using Surround Height speakers is
recommended.
Contents Connections Playback Settings Tips Appendix
311
Front panel Display Rear panel Remote Index
98