Denon AVR-X4200W - Page 82

1.3. File structure on USB Memory
Copy the update les to the USB memory with the following structure.
USB memory root
Model Name Model Area Product ID
AVR-X4200W
North America (E3) 000100850100
Europe (E2) 000100850200
Japan (JP) 000100850400
China (E1C) 000100850500
+ rmwares
+ 000100XXXXXX
+ APLD.bin
+ DSP1.bin
+ DSP2.bin
+ DSP3.bin
+ DSP4.bin
+ enc_update.xml
+ GUI.bin
+ IMG.bcd
+ MAIN.bin
+ VPLD.bin
1.4. Insert the USB memory into the USB port.
NOTE : Remove the LAN cable from this unit when performing updates.
1.5. Start the update.
While holding down buttons "
STATUS
" and "
OPTION
" simultaneously, press the power button to turn on the power.
1.6. Display during USB update
After around half minutes, display shows the following message.
Display
FLD
L1
* F I R M W A R E
L2
U S B U p d a t e : S t a r t
1.7. Press the "ENTER" key on the remote control unit or this unit.
Then start Firmware Update.
Display
FLD
L1
* F I R M W A R E
L2
U p d a t e F i l e C h e c k
Download firmware
in USB flash drive.
82