Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center
channel.
176
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 176
Surround Parameter Adjusts surround sound parameters. 177
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
182
Audio Delay Compensates for incorrect timing between video and audio. 183
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 184
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
185
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 188
.
Video
Picture Adjust Adjusts picture quality. 190
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 192
Output Settings Makes settings for video output. 197
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 200
On Screen Display Configures the on-screen display settings. 201
TV Format Sets the video signal format to be output for the TV you are using. 202
Contents Connections Playback Settings Tips Appendix
Settings
171
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
