Denon AVR-X6300H User Manual

Upgrade (Auro-3D)
.
Sound mode
Surround Parameter
Dialog Level
Adjust
Subwoofer
Level Adjust
Cinema EQ
Loudness
Management
z1
Dynamic
Compression
z2
Dialog Control
z3
Low Frequency
z4
Delay Time Room Size
Auro-3D
SSS S
Auro-2D Surround
SSS S
Sound mode
Surround Parameter
Tone
z7
Audyssey
Restorer
z11
Speaker
Select
Center Spread DTS Neural:X
Auro-Matic 3D
Preset
Auro-Matic 3D
Strength
MultEQ® XT32
z8z9
Dynamic EQ
z10
Dynamic
Volume
z10
Audyssey
LFC™
z10
Auro-3D
Sz12 Sz12 SSSSSS
Auro-2D Surround
SSSSSS
z1 - z4, z7 - z12 : “Sound modes and surround parameters” (v p. 305)
Contents
Connections Playback Settings Tips Appendix
304
Front panel Display Rear panel Remote Index

Denon AVR-X6300H Specifications

General

Receiver type	Surround
Frequency range	10 - 10000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	175 W
Power output per channel (20-20KHz@8 Ohm)	140 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	3.5 mm
Multichannel audio output type	RCA
Display	-
Audio decoders	DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
Connector contacts plating	Gold
Apple docking compatibility	Not supported
Connectivity technology	Wired & Wireless
Speakers connectivity type	3.5mm
Audio formats supported	AAC, ALAC, DSD, FLAC, MP3, WAV, WMA
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Internet radio services supported	Napster, Pandora, SIRIUS Internet Radio, Spotify, TuneIn
Optical drive included	No
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	750 W
Supported video modes	2160p

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	235 mm
Weight	14500 g