Denon DRA-201SA - Tuner Operations; Presetting AM and FM Stations; Tuning Preset Stations; Using RDS Functions

14
ENGLISH
(2) Presetting AM and FM stations
Example: To preset the currently tuned in FM station at preset number “3”
Procedure
1
Press the MEMORY/SET button.
• The “MEMO” indicator
flashes.
✽
To store the station at a different preset
number, use the tuning buttons
(PRESET/TUNING UP or DOWN) to set the
desired preset number.
2
While the “MEMO” indicator
is flashing, press the
PRESET/TUNING UP button
three times to display “P3”.
Press the MEMORY/SET button
again while the “MEMO”
indicator is flashing.
• The “MEMO” indicator turns
off and the station is preset.
3
✽
A total of 40 AM and FM stations can be preset
using this procedure.
Presetting
• When a station is preset, both the reception
frequency and reception mode are stored in the
memory.
• If a station is preset at a number where another
station is already preset, the previous station is
erased and the new station is set.
• The preset memory is not erased immediately if the
power supply is cut off momentarily.
• This setting can also be made by pressing the
button three times instead of pressing
“e”.
• To store the station at a different preset number,
use the number buttons and the +10 button on the
system remote control unit (RC-906) to set the
desired preset number.
Examples:
To store the station at preset number 12:
Press ,
To store the station at preset number 29:
Press , ,
9
+10
+10
2
+10
TUNING
CH
MHz
TUNED STEREO AUTO
TIMER
BAND
/ RDS
MEMORY
/ SET
DOWN UP
PRESET / TUNING
PHONES FUNCTION
VOLUME
SOURCE DIRECT
MODEON / STANDBY
STEREO RECEIVERER DRA-201SA
1, 3 2
DOWN UP
PRESET / TUNING
MEMORY
/ SET
MEMORY
/ SET
MEMORY
/ SET
MEMORY
/ SET
3
//
DRA-201SA
(this unit)
DRA-201SA
(this unit)
(RC-906)
✽
When operating with the
system remote control unit,
first set the remote control
unit’s function selector switch
to “TUNER”.
TUNER
CD
CD-R
MD
TAPE
(RC-906)
(3) Tuning in Preset Stations
Example: To tune in the station stored at preset
number “3”
1
Press the PRESET UP
button three times to display
“P3”.
CH
MHz
TUNED STEREO AUTO
TIMER
BAND
/ RDS
MEMORY
/ SET
DOWN UP
PRESET / TUNING
PHONES FUNCTION
VOLUME
SOURCE DIRECT
MODEON / STANDBY
STEREO RECEIVERER DRA-201SA
1
DOWN UP
PRESET / TUNING
✽
Preset stations can also be called out using the
preset buttons (PRESET UP and DOWN) after a
preset number is called out.
Example:
After calling out “
P3”, press the PRESET UP button
to call out “P4”, the PRESET DOWN button to call
out “P2”.
✽
When operating with the
system remote control unit,
first set the remote control
unit’s function selector switch
to “TUNER”.
TUNER
CD
CD-R
MD
TAPE
(RC-906)
Procedure:
• Instead of pressing e, the preset
channel can also be called out by
pressing the < or > button to display
“P3”.
• To call the station at a different preset number, use
the number buttons and the +10 button on the
system remote control unit (RC-906) to set the
desired preset number.
Examples:
To call the station at preset number 12:
Press ,
To call the station at preset number 29:
Press , ,
9
+10
+10
2
+10
3
(4)
Using the RDS functions
CH
MHz
TUNED STEREO AUTO
TIMER
BAND
/ RDS
MEMORY
/ SET
DOWN UP
PRESET / TUNING
PHONES FUNCTION
VOLUME
SOURCE DIRECT
MODEON / STANDBY
STEREO RECEIVERER DRA-201SA
1, 2, 5, 9 6 3, 7,10
CLEAR
546
789
10
+10
CD SRS
MDTAPECD-R
TUNING
REV.
MODE
Dolby NR
REPEAT
CALL
RANDOM
BAND
RDS
DIMMER
TIME/
PANEL
TIME EDIT
STOP PLAY
VOLUME
/SELECT
SLEEP MODE
TAPE
FUNCTION
PRESET
+
-
1
2,5,9
3,7,10
12
6
RC-906
(system remote
control unit)
✽
Be sure that the UP/DOWN buttons function
as the PRESET UP/DOWN buttons before
proceeding with step 1.