Denon DRA-201SA - Receiving RDS Broadcasts; Setting FM AUTO for RDS; PTY Search; TP Search

15
ENGLISH
PTY Search
5
Press the RDS button twice on the
remote control unit.
BAND
/ RDS
Flashes
7
Press the PRESET/TUNING
UP or DOWN button.
DOWN UP
PRESET / TUNING
8
The station is tuned in.
Once the station is tuned in, ”RDS“ and ”PTY“
flash for 5 seconds and the program service
name is displayed.
”PTY“ and ”RDS“ light after 5 seconds of flashing.
NOTE: If no program of the specified type is
found,” NO PROG “ is displayed.
(”PTY“ and ”RDS“ flash, and ”, PTY /“ is
displayed.)
6
Press the MEMORY/SET button
to select the type of program.
Press the PRESET < or >
button on the remote control
unit to select the type of
program.
(One of the 29 types listed
below can be selected.)
MEMORY
/ SET
Flashes
Station name
Press the BAND/RDS button for at
least 3 seconds. Then press the
BAND/RDS button once.
RDS
PRESET
+
-
Press the TUNING • or ª
button on the remote control
unit.
TUNING
(News)
(Varied)
(Affairs)
(Information)
(Sport)
(Education)
(Drama)
(Culture)
(Pop Music)
(Rock Music)
(
Easy Listening
)
(Light Classics)
(Serious Classics)
(Other Music)
(Science)
Programs
TP Search
9
Press the RDS button 3 times on
the remote control unit.
11
The station is tuned in.
Once the station is tuned in, ”TP“ and ”RDS“
light and program service name is displayed.
“TP” and “RDS” light after 5 seconds of flashing.
NOTE: ” NO PROG “ is displayed when there is
traffic information broadcast station.
10
Press the PRESET/TUNING
UP or DOWN button.
DOWN UP
PRESET / TUNING
RT (Radio Text)
12
To turn the RT mode on, press the
PANEL button on the remote control
unit until the RT indicator is lit. (Refer
to page 11.)
When the station currently tuned in is
offering a radio text message service,
the message scrolls on the display.
TIME/
PANEL
• When the RT mode is turned on while an RDS radio
station not offering an RT service is tuned in, ” NO
TEXT “ flashes on the display, then the mode
automatically switches to the PS mode.
• In the same way, the mode automatically switches to
the PS mode when the RT service is finished. In this
case, the mode automatically switches from the PS
mode back to the RT mode when an RT broadcast is
resumed.
• The RT mode cannot be set in the AM band or FM
stations not offering RDS broadcasts.
• To turn the RT mode off, press the PANEL button and
switch to the desired display mode.
(This operation is only possible from the remote
control unit RC-906)
BAND
/ RDS
RDS
Press the BAND/RDS button for at
least 3 seconds.
The press the BAND/RDS button
twice.
TUNING
Press the TUNING • or ª
button on the remote
control unit.
(Weather & Meteorological)
(Jazz Music)
(Finance)
(Children's Progs)
(Social Affairs)
(Religion)
(Phone In)
(Travel & Touring)
(Country Music)
(National Music)
(Oldies Music)
(Folk Music)
(Documentary)
(Leisure & Hobby)
Flashes
Flashes
NOTE:
The PANEL function can only be operated with the
remote control unit (RC-906).
Receiving RDS broadcasts (FM only)
1
Press the BAND button on the
remote control unit and set the FM
AUTO.
BAND
/ RDS
2
Press the RDS button on the remote
control unit.
Flashes
BAND
BAND
/ RDS
RDS
Press the BAND/RDS button and set
the FM AUTO.
Press the BAND/RDS button for at
least 3 seconds.
3
Press the TUNING
•
or
ª
button on the remote control
unit.
DOWN UP
PRESET / TUNING
Flashes
4
The station is tuned in.
Once the station is tuned in, ”RDS“ flashes for
5 seconds and program service name is
displayed.
”RDS“ lights after 5 seconds of flashing.
NOTE: • If no RDS station is found, ” NO PROG “ is
displayed.
TUNING
Press the PRESET/TUNING
UP or DOWN button.
Station name