13
Operation Operation
ENGLISH
ENGLISH
Press MENU/SET three times.
•The name input mode is set.
Use [8] or [9] to select the desired character.
Up to 8 characters can be input.
The characters that can be input are as shown below.
Press [ENTER/MEMO].
Use TUNING to move the cursor.
Press [CLEAR/DEL] to delete characters.
Giving a name to the currently tuned in
broadcast station and presetting it
Presetting broadcast stations automatically
(Auto preset)
Listening to preset broadcast stations
Tune in the broadcast station ( page 12).
•The reception frequency is displayed.
2
4
Use [8] or [9] to select the preset number, then
press [ENTER/MEMO].
•The reception frequency and reception mode are preset.
5
3
1
Press and hold MENU/SET.
•“AUTO PRESET” is displayed.
Use FUNCTION to select “TUNER”.
•The reception frequency is displayed.
2
Press MENU/SET.
•Broadcast stations are preset automatically.
3
1
•A total of 40 FM and AM broadcast stations combined can be
preset.
•Preset stations can be given names of up to 8 characters.
AB C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
^ ’ ( )
*
+ , – . / = (space)
¢ To change the name of a preset station:
qCall out the station whose name you want to change, then press
MENU/SET three times.
wPerform step 3, 4 under “Giving a name to the currently tuned in
broadcast station and presetting it”.
¢ To stop the auto preset operation before it is
completed:
Press BAND.
¢ To only preset the station:
qPress [ENTER/MEMO] while the station is tuned in.
The “MEMO” indicator flashes.
wPerform step 5 under “Giving a name to the currently tuned in
broadcast station and presetting it”.
NOTE:
• If a station is preset at a number where a station has already
been preset, the old setting is deleted and replaced with the
new setting.
•Broadcast stations whose signals are weak cannot be preset
automatically. To preset them, tune them in manually, then follow
the operation described at “Giving a name to the currently tuned in
broadcast station and presetting it”.
Example: To listen to the FM station preset at preset number 3.
Press [3] (Number).
•Preset number “3” is displayed.
For track numbers 1 to 10, press the corresponding button ([1] to
[10]).
For track numbers 10 and on, first press [+10] then press buttons
[1] to [10].
Example: Track 12 : [+10] [2].
Example: Track 20 : [+10] [10].
The preset number can also be chosen using [8] or [9].
RDS (works only on the FM band) is a broadcasting service which
allows station to send additional information along with the regular
radio program signal.
¢ Program Type (PTY)
PTY identifies the type of RDS program.
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
Varied
Pop Music
Rock Music
Easy Listening
VARIED
POP M
ROCK M
EASY M
Light Classical
Serious Classical
Other Music
LIGHT M
CLASSICS
OTHER M
Weather
WEATHER
Finance
Children’s
Programs
Social Affairs
Religion
Phone In
Travel
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
Leisure
Jazz Music
LEISURE
JAZZ
Country Music
National Music
Oldies Music
COUNTRY
NATION M
OLDIES
Folk Music
Documentary
FOLK M
DOCUMENT
¢ Traffic Program (TP)
TP identifies programs that carry traffic announcements.
¢ Radio Text (RT)
RT allows the RDS station to send text messages that appear on
the display.
NOTE:
• The operations described below pressing [RDS] will not function
in areas in which there are no RDS broadcasts.
RDS (Radio Data System)
To Next Page
Loading...
