Denon DRA-F102 - Edit Function

ENGLISH
ENGLISH
20
System Operations System Operations
<ON/STANDBY>
MENU/SET
<TAPE 2>
[NUMBER]
MENU/SET
CD 1 / 3
CD 2
[TIME/DISPLAY]
[ 9 ]
[
8 ]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
This unit
[
DRA-F102]
System remote control unit
[RC-1034]
Cassette tape deck [DRR-F102]
•This function lets you record onto cassette tapes with automatic
editing according to the length of the tape.
•Load the CD and cassette tape before starting.
Edit function
Turn on the power of the various components.
Press MENU/SET three times in a row.
•“EDIT” is displayed .
1
2
Use [9] to set the length of the cassette tape.
Example: To record onto a 60-minute cassette tape, use [9] to
select “C-60”.
3
C
–
46 C
–
60 C
–
90 C
–
(The length of the cassette tape is the total length for sides A and B.)
•When the length of the cassette tape is set, the display alternates
between the track numbers to be recorded and the remaining time
for side A and the track numbers to be recorded and the remaining
time for side B.
A 01-09 -02:40
Track number Remaining time
Press CD 1/3.
•Recording of the CD starts.
4
¢ Setting a specific cassette tape length:
When “C –” is displayed, use [NUMBER] (1 ~ 10, +10) to input the
time.
Example: To set to 54 minutes
[+10] [+10] [+10] [+10] [+10] [4]
The length can be set to up to 99 minutes.
Editing canceled
¢ Canceling the editing function:
Press CD 2 or
<
TAPE 2
>
.
CD 1/3 CD 2
CD player [
DCD-F102] or CD/ HDD
player
[CHR-F103]