Denon DRA-F102 - Auto Function Selection; Auto Power on Function; System Operations; Timer Function

ENGLISH
ENGLISH
18
System Operations
System Operations
When this set is used with other components in the F102/F103 series, it is possible to perform such system operations as synchronized
recording of CDs.
<ON/STANDBY>
MENU/SET
TAPE PLAY
<REVERSE MODE>
<DOLBY NR>
<DIRECTION>
CD 1/3
MENU/SET
[ 8 ]
CD 1 / 3
TAPE PLAY
[ 9 ]
[POWER OFF]
[iPod
1 / 3 ]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
This unit
[
DRA-F102]
Cassette tape deck [DRR-F102]
CD player [
DCD-F102] or CD/ HDD
player
[CHR-F103]
System remote control unit
[RC-1034]
•The DRA-F102 controls all system operations.
•Also read the operating instructions of the various components.
Auto power on function
When the devices’ power is set to the standby mode,
press [CD 1/ 3], [iPod 1/ 3] or [TAPE PLAY].
•The power to the corresponding device turns on and the DRA-
F102’s function switches automatically.
•If a disc or cassette deck is loaded in the corresponding device,
playback starts.
Auto function selection
Press CD 1/ 3, [iPod 1/ 3] or TAPE PLAY while any
device other than the DRA-F102 is playing.
•Playback stops.
•The DRA-F102’s function switches automatically and playback
starts.
Timer function
Press MENU/SET once.
•“TIMER” flashes.
1
2
•Sources can be played or recorded at set times using the DRA-
F102’s timer function.
•Be sure to set the current time first ( page 15).
•To use the timer function to listen to AM or FM broadcasts, be sure
to preset the desired station first ( page 13).
•For details, see pages 15 ~ 17.
Conducting timer playback
Example: Listening to a CD using the once timer
Load the CD you want to play beforehand.
Use [8] or [9] to select “ONCE”, then press
MENU/SET.