q Power operation switch
(ON/STANDBY) ····························(11, 16, 19)
w Power indicator ········································(11)
e Remote control sensor ······························(2)
r Display·························································(3)
t PORTABLE IN jack····································(10)
y PHONES jack
•Use this jack to connect headphones
(commercially available).
When headphones are plugged in, the sound
can only be heard from the headphones.
u VOLUME control knob·····························(11)
i MENU/SET button·····················(13, 15 ~ 21)
o TUNING buttons ································(12, 13)
!0 BAND button······························(12 ~ 14, 16)
!1 SDB/TONE button····································(11)
!2 FUNCTION knob ························(11 ~ 13, 17)
Display
q Information display
Various information is displayed here,
depending on the operation mode.
•Function
•Time
•Name of radio station
•Preset station name
•Volume level
•Tone adjustment level, etc.
w Remote control signal reception indicator
e Timer operation indicator
r Tuner reception mode indicators
t Tone indicators
•SDB:
Lights when the super dynamic bass function is
set to “ON”.
•TONE:
Lights when the tone (bass/treble) is being
adjusted.
For details on the functions of these parts, refer to the pages given in parentheses ( ).
Rear panel
q ANTENNA terminals··································(9)
w MONO OUT terminal ·································(8)
e SYSTEM CONNECTOR jack·······················(7)
r DOCK CONTROL jack·······························(10)
t SPEAKER SYSTEM terminals····················(8)
y AC outlet·····················································(7)
u Power supply cord ·····································(7)
i Analog input terminals······························(7)
o Analog output terminals ···························(7)
To Next Page
Loading...
