Denon DRA-F102 - RDS Search; PTY Search; TP Search; RT (Radio Text)

14
Operation Operation
ENGLISH
ENGLISH
Use BAND to select “FM AUTO”.
1
Press
[
RDS
]
.
2
Press TUNING.
•Automatically begin the RDS search operation.
If no RDS station is found, “NO PROGRAM” is displayed.
3
RDS search
Use BAND to select “FM AUTO”.
1
Press
[
RDS
]
twice.
2
Press TUNING.
•Automatically begin the PTY search operation.
If no program of the specified type is found, “NO PROGRAM” is
displayed.
4
PTY search
Use
[
PTY
]
to select the type of program.
3
Use BAND to select “FM AUTO”.
1
Press
[
RDS
]
three times.
2
Press TUNING.
•Automatically begin the TP search operation.
“NO PROGRAM” is displayed when there is no traffic information
broadcast station.
3
TP search
Press
[
TIME/DISPLAY
]
until “Radio Text” scrolls on the
display.
When the station currently tuned in is offering a radio text
message service, the message scrolls on the display.
RT (Radio Text)
•When the RT mode is turned on while an RDS radio station not
offering an RT service is tuned in, “NO TEXT” is displayed on the
display, then the mode automatically switches to the PS mode.
•In the same way, the mode automatically switches to the PS mode
when the RT service is finished. In this case, the mode automatically
switches from the PS mode back to the RT mode when an RT
broadcast is resumed.
•The RT mode cannot be set in the AM band or for FM stations not
offering RDS broadcasts.
•To turn the RT mode off, use [TIME/DISPLAY] and switch to the
desired display mode.
TUNING
BAND
FUNCTION
MENU/SET
FUNCTION
[NUMBER]
MENU/SET
BAND
TUNING
[CLEAR/DEL]
[ 9 ]
[
8 ]
[TIME/DISPLAY]
CLOCK
[RDS]
[PTY]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit