Denon MC6000MK2 User Manual

7
Installing and setting up supplied software (Be sure to follow these instructions)
1
Insert the supplied “MC6000MK2 Resource Disc”
into the computer.
The browse screen for the disc drive is displayed.
•If the browse screen is not displayed, click the disc drive on My
Computer.
2
Click “Asio Driver Installation”.
TheASIODriverSetupWizardislaunched.
3
Click “Next >”.
The license agreement screen appears.
The InstallShield(R) Wizard will install DENON DJ ASIO for DJ
Controller on your computer. to continue, click Next.
WARNING: This program is protected by copyright law and
international treaties.
Welcome to the InstallShield Wizard for
DENON DJ ASIO for DJ Controller
DENON DJ ASIO for DJ Controller - InstallShield Wizard
Cancel
Next >
< Back
< Back
4
If you agree, select “I accept the terms in the license
agreement”.
The “Next >” can now be selected.
5
Click “Next >”.
A screen for verifying the folder in which the ASIO driver is to
be installed appears.
I accept the terms in the license agreement
I do not accept the terms in the license agreement
SOFTWARE LICENSE AGREEMENT
NOTICE TO USER: Please read this Agreement carefully. By installing and using
all or any portion of the software(“Software”)supplied by D&M Holdings Inc
(“D&M”), you accept all the terms and conditions of this Agreement. You agree that
this agreement is enforceable like any written negotiated agreement signed by you.
This Agreement is enforceable against you and any person or legal entity that
obtained the software and on whose behalf it is used. If you do not agree, do not install
or use this Software.
D&M is the legal owner to all the intellectual property embedded,embodied and
InstallShield
InstallShield
DENON DJ ASIO for DJ Controller - InstallShield Wizard
Cancel
Print
< Back Next >
Please read the following license agreement carefully.
License Agreement
6
Click “Next >”.
A screen for verifying whether or not to create a desktop
shortcut appears.
InstallShield
InstallShield
Install DENON DJ ASIO for DJ Controller to:
C:￥Program Files￥DENON_DJ￥DDJCTRASIO￥
DENON DJ ASIO for DJ Controller - InstallShield Wizard
Cancel
Change...
< Back Next >
Click Next to install to this folder, or click Change to
install to a different folder.
Destination Folder
•By default, the ASIO driver is installed in “C\Program Files\
DENON_DJ\DDJCTRASIO\”.
To change this location, click “Change” and select a different
folder.
Installing the ASIO driver (Windows only)
There is no need to install drivers on a Mac computer. Proceed to page11.
UsethefollowingstepstoinstallthesuppliedASIOdrivers.Wheninstallingoruninstallingthedriversoftware,theadministrativeauthorizationofthecomputerisrequired.Logonasanadministratorofthecomputer,
and execute the installation.
The supplied ASIO drivers are for the exclusive use on DENON DJ controllers. Available on DN-MC6000/MC3000/MC2000/MC6000MK2 models.

Denon MC6000MK2 Specifications

General

Mixer section	Yes
Product color	Black, Multicolour
Scratcher type	Vinyl scratcher
Frequency range	20 - 20000 Hz
Output level (XLR)	-60 dBV
Output level (L, R)	24 dBV
Built-in optical drive	-
Equalizer bands quantity	3
Number of mixer channels	4 channels
Signal-to-Noise Ratio (SNR)	84 dB
Number of scratcher platters	2
Number of dedicated effects controls	1
Signal-to-Noise Ratio (SNR) (headphone out)	82 dB
Total Harmonic Distortion plus Noise (THD+N)	0.05 %
Maximum output level (booth, unbalanced, L, R)	4
USB connector type	USB Type-B
Microphone connectivity	XLR
Input voltage	120 - 230 V
Power supply type	AC
Built-in display	No
Bundled software	Serato DJ Intro

Weight and Dimensions

Depth	283.7 mm
Width	460 mm
Height	71.5 mm
Weight	4300 g