25
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in this owner's manual?
3. Is the external device (player or effects processor) operating correctly?
If this unit does not operate properly, check the items listed in the table below.
If the symptom is not covered on the check list, contact your dealer or service centers.
Service centers are listed at http://www.d-mpro.com.
Symptom Cause/Solution Page
Power does not turn
on.
•Check the connection of the AC adapter power plug to the outlet and
the connection of the DC plug to the unit.
6
There is no sound, or
the sound is too quiet.
•Check the connections for all devices.
•Set the channel input source select knob to the device that is playing
back.
•The mic ducking function is operating. Set the
DUCKING switch to
”OFF”.
4,5,6
12
13
The sound is distorted. •Adjust the master output level adjustment knob.
•Adjust the channel input level adjustment knob.
–
12
This unit does not
operate properly, or
there is no sound.
•Check the connections for all devices.
•Check that the volume settings for the connected devices and DJ
software on the computer are properly adjusted.
•Match the settings on the unit to those on DJ software.
•WAV files become mixed if the sampling frequency and bit number
are different. Depending on the audio application used, WAV files that
have different sampling frequencies or bit numbers cannot be played
simultaneously.
•When other USB devices are connected to the computer, connect
only the unit to the computer and check if this works.
4,5,6
12
–
–
–
Sound cuts out or is
distorted.
•Exit any other applications.
•When multiple WAV files are played back simultaneously, the playback
sound may cut out depending on the computer specifications. Try
playing back 1 WAV file.
–
–
The button lights are
dim.
•The dimmer is in operation. Check the dimmer settings on the DJ
software.
–
Troubleshooting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
