Denon MC6000MK2 User Manual

26
n Audio
(0 dBu=0.775 Vrms, 0 dBV =1 Vrms)
•PHONO inputs 2 Stereo
Unbalanced RCA terminal
Input impedance: 50 kΩ/kohms
Level: –40 dBV(10 mV)
Signal to Noise ratio: Over 82 dB
•LINE 1, 2 inputs 2 Stereo
Unbalanced RCA terminal
Input impedance: 10 kΩ/kohms
Level: 0 dBV
Signal to Noise ratio: Over 84 dB
•LINE 3, 4 inputs 2 Stereo
Unbalanced RCA terminal
Input impedance: 10 kΩ/kohms
Level: 0 dBV
Signal to Noise ratio: 82 dB or later
•Equalizer (CH) 3 Band
Channel EQ Adjustment Range: HI (High Range) : –∞, –90 dB – +10 dB
MID (Medium Range) : –∞, –90 dB – +10 dB
LOW (Low Range) : –∞, –90 dB – +6 dB
•MIC inputs 2 Monaural
MIC 1: Combo jack
(terminal for balanced XLR and balanced 1/4 inch TRS)
(1: ground, 2: hot, 3: cold, chip: hot, ring: cold, sleeve: ground)
MIC 2: Balanced 1/4 inch TRS terminal
Input impedance: 5 kΩ/kohms
Level: –60 dBu – –16 dBu
•Equalizer (MIC) 3 Band
Adjustment Range: HI (High Range) : –15 – +15 dB
MID (Medium Range) : –15 – +15 dB
LOW (Low Range) : –15 – +15dB
•USB audio inputs 2Stereo(4Monaural)16bit,Fs:44.1kHzUSBB
•MASTER output
Balanced: Stereo, balanced XLR terminal
(1: Ground, 2: Hot, 3: Cold)
DA converter: 24 bit
Load impedance: Over 600 Ω/ohms
Level: + 4 dBu (Max + 24 dBu)
When RL=100 kΩ/kohms
Frequency response: 20Hz–20kHz(±1dB)
THD: Less than 0.05%
Crosstalk: Lessthan–90dB(1kHz)
Unbalanced: Stereo RCA terminal
Load impedance: 100 kΩ/kohms
Level: 0 dBu (Max + 20dBu)
•BOOTH Output Stereo balanced 1/4 inch TRS terminal
Load impedance: Over 600 Ω/ohms
Level: + 4 dBu (Max + 24 dBu)
When RL=100 kΩ/kohms
•Headphone output Stereo
Load impedance: 40 Ω/ohms
Level: 100 mW
•USB audio output 2Stereo(4Monaural)16bit,44.1kHzUSBB
n General
USB MIDI I/O: IN: 1ch, OUT: 1ch MIDI 1.0, MIDI Clock USB B
CH/MASTER Meter: PPM 7 Point LED –20 – +10 dB, Peak
CH Fader: 45 mm Slim Type Fader
Cross Fader: 45 mm Fader
•Power voltage: DC12V (the unit)
AC adapter input:
U.S.A. and Canada models: AC120V,60Hz
European,U.K. and Asia/
Pacific models: AC230V,50Hz
AC adapter output: DC 12V 3A
Power consumption: 24 W
Operating temperature: +5 °C – +35 °C
Operating humidity: 25 % – 85 %
Storage temperature: –20 °C – 60 °C
z For the purpose of improvement, the specifications and design are subject to change without notice.
Specifications

Denon MC6000MK2 Specifications

General

Mixer section	Yes
Product color	Black, Multicolour
Scratcher type	Vinyl scratcher
Frequency range	20 - 20000 Hz
Output level (XLR)	-60 dBV
Output level (L, R)	24 dBV
Built-in optical drive	-
Equalizer bands quantity	3
Number of mixer channels	4 channels
Signal-to-Noise Ratio (SNR)	84 dB
Number of scratcher platters	2
Number of dedicated effects controls	1
Signal-to-Noise Ratio (SNR) (headphone out)	82 dB
Total Harmonic Distortion plus Noise (THD+N)	0.05 %
Maximum output level (booth, unbalanced, L, R)	4
USB connector type	USB Type-B
Microphone connectivity	XLR
Input voltage	120 - 230 V
Power supply type	AC
Built-in display	No
Bundled software	Serato DJ Intro

Weight and Dimensions

Depth	283.7 mm
Width	460 mm
Height	71.5 mm
Weight	4300 g