Denon RCD-N8

14
DISASSEMBLY
• Disassemble in order of the arrow in the following gure.
• In the case of the re-assembling, assemble it in order of the reverse of the following ow.
• In the case of the reassembling, observe "Caution concerning disassembly and assembly!".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
CAUTION:
Through great care is taken when manufacturing parts from sheet metal, there may in some rare cases be burrs on the
edges of top cover which could cause injury if ngers are moved across them. Use gloves to protect your hands.
SIDE PANEL
CD MECHA ASSY
Refer to "DISASSEMBLY
2. CD MECHA ASSY"
and "EXPLODED VIEW"
CD MECHA ASSY
(Ref. No. of EXPLODED VIEW : 10)
MAIN PCB ASSY
Refer to "DISASSEMBLY
2. MAIN PCB ASSY"
and "EXPLODED VIEW"
MAIN PCB ASSY
(Ref. No. of EXPLODED VIEW : P2)
FRONT PANEL ASSY
Refer to "DISASSEMBLY
3. FRONT PANEL ASSY"
and "EXPLODED VIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW : 2)
SMPS PCB ASSY
Refer to "DISASSEMBLY
4. SMPS PCB ASSY"
and "EXPLODED VIEW"
SMPS PCB ASSY
(Ref. No. of EXPLODED VIEW : P6)
NETWORK PCB ASSY
Refer to "DISASSEMBLY
4. NETWORK PCB ASSY"
and "EXPLODED VIEW"
NETWORK PCB ASSY
(Ref. No. of EXPLODED VIEW : P5)
TOP COVER
Refer to "DISASSEMBLY
1. TOP COVER"
and "EXPLODED VIEW"
TOP COVER
(Ref. No. of EXPLODED VIEW : 21)