DentalEZ NuSimplicity - Section II Preinstallation Packaging

9
www.DentalEZ.com
866-DTE-INFO
9
DentalEZ
®
Equipment
PN: 2717-256E
Section II Preinstallation
Packaging
Tools Required
• Pliers
• 1/2" Socket & Ratchet
Unpacking Chair Carton
1. Using pliers, remove the staples that secure the
shipping carton to the wooden pallet.
2. Remove the carton and packing inserts from
the pallet by lifting up.
3. Using a 1/2" socket and ratchet, remove the two
bolts that secure the chair base to the shipping
pallet.
4. Grasp the chair mount casting and slide the
chair o of the pallet. (If air glide equipped, do
not slide .)
5. Remove and set aside the following items from
the chair carton for installation:
• Upholstered seat
• Headrest
• Chair controls
• Any ordered options
• Hardware package
• During transportation, the chair must be
at its lowest height and all attachments
must be secured in their lowest and
most central positions possible. Failure
to comply may result in injury and/or
damage to equipment.
• The NuSimplicity Chair is shipped with
a retaining strap to secure the base
mechanism. DO NOT REMOVE this strap
until the chair is out of the carton and in
its position on the  oor.
• The chair is heavy and weighs in excess
of 300 lbs. (depending on options). Use
assistance to remove the chair from
the pallet. Failure to do so may result in
serious back injury.
• DO NOT CONNECT the chair POWER cord
until all shipping hardware is removed.
WARNING
• To avoid damage to the carton contents,
do not use a knife or sharp object to open
the packaging.
• If the chair is equipped with an air glide
option, be careful not to damage the air
bladder when lifting (do not slide) the
chair o of the delivery pallet and during
placement of the chair.
CAUTION