DentalEZ NuSimplicity - Armrests; Standard Fixed Headrest

www.DentalEZ.com
866-DTE-INFO
20
NuSimplicity
TM
Chair
PN: 2717-256E
Armrests Standard Fixed Headrest
Both of the NuSimplicity Chair’s armrests are
designed to be lowered, allowing easy patient
entry and exit from either side of the chair.
To lower and raise each armrest:
1. Pull the arm out to unlock and lower the arm
(Figure 24).
2. Raising the arm up will automatically lock it
into position.
Figure 24. NuSimplicity Chair armrest
To position the standard  xed headrest:
Firmly push down or pull up the blade from the
chair back to change the standard  xed headrest
height (Figure 25).
NOTE: The use of disposable headrest covers is
recommended to prevent soiling of the headrest.
These covers may be purchased through a local
dental supplier.
Standard
Fixed
Headrest
Blade
Figure 25. Standard  xed headrest
The armrests SHOULD NOT be used as a
means of support when entering, exiting or
leaning against the chair.
CAUTION
Section IV Operation