DentalEZ NuSimplicity - Chair Placement

www.DentalEZ.com
866-DTE-INFO
10
NuSimplicity
TM
Chair
PN: 2717-256E
Section II Preinstallation
Chair Placement
1. Taking into consideration the NuSimplicity
Chair’s dimensions, range of motion, and
speci cations (see Section I Introduction),
position the chair in its permanent location on a
smooth, hard and level  oor.
NOTE: Make sure the chair is placed where
nothing will interfere with its movement.
2. Remove the retaining strap that secured the
base mechanism during shipment.
Upholstered Seat
Upholstered
Back Assembly
Chair Controls
Headrest
Options
Hardware Package
Upholstered
Armrests
Figure 4. NuSimplicity Chair upholstery packaging
NOTE: The base cover must be removed before
anchoring the chair.
Figure 5. NuSimplicity Chair anchor holes
Anchor hole
Anchor hole
Unpacking Upholstery Carton
If the upholstery is ordered separately from the
chair, remove and set aside the following items
from the NuSimplicity Chair upholstery assembly
packaging (Figure 4):
• Upholstered back assembly
• Sling assemblies
• Upholstered seat
• Upholstered armrests
• Headrest
• Optional foot control
• Any ordered options
• Hardware package
To prevent injury as a result of chair
tipping, chair must be placed on a smooth,
hard and level  oor.
• DO NOT position the chair any place
where it would interfere with unplugging
the chair power cord.
• Before mounting a delivery unit, it is
recommended to anchor the chair to the
 oor for optimal stability.
WARNING
Packaging (Continued)