EasyManua.ls Logo

DentalEZ NuSimplicity - Page 31

DentalEZ NuSimplicity
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.DentalEZ.com
866-DTE-INFO
28
NuSimplicity
TM
Chair
PN: 2717-256E
Section V Care
Allow the bleach solution to puddle on the
a ected area, or apply a bleach solution-
soaked cloth to the area for approximately
30 minutes.
Using a soft cloth dampened in plain
water, rinse the treated area thoroughly to
remove any bleach residue.
4. To remove stains using alcohol:
Dampen a soft, white cloth with rubbing
alcohol and rub the stain gently.
Using a soft cloth dampened in clean
water, rinse the treated area thoroughly to
remove any alcohol residue and pat dry.
5. To restore luster:
Apply a light coat of spray furniture wax
containing lemon.
Wait 30 seconds and lightly bu the
surface using a clean, white cloth.
Ultraleather
TM
Spot clean with mild soap and water.
Air dry or dry quickly with warm setting of a
hair dryer.
For stubborn stains, use mild solvent.
For extremely stubborn stains, an alcohol-
based solvent can be used.
Dry cleanable by conventional methods using
commercial dry cleaning solvents.
Ultraleather is a trademark of Ultrafabrics, LLC.
Plastic and Coated Metal Surfaces
1. To remove ordinary dirt:
Prepare a soapy solution comprised of
neutral detergent (household dish washing
liquid) and water.
Using a soft cloth or sponge, apply this
soapy solution to the plastic and coated
metal surfaces.
NOTE: To remove heavier dirt, apply Formula
409® or Fantastik® Spray Cleaner.
Wipe area dry immediately using a soft cloth.
2. To remove stubborn stains:
Apply a mild abrasive such as toothpaste or
liquid tooth polish using a soft, white cloth.
Using a chamois or moist sponge, remove
all traces of the mild abrasive.
Dry the area thoroughly to prevent marking.
Formula 409 is a registered trademark of the Clorox Company.
Fantastik Spray Cleaner is a registered trademark of the Texize Division
of Dow Products, Inc.
Metal Surfaces and Chrome Parts
For ordinary dirt, ngerprints, etc., use a non-
abrasive, all-purpose cleaner.
Cleaning (Continued)
• NEVER use abrasives or petroleum-based
cleaners on any plastic or coated metal
surfaces unless otherwise speci ed.
DO NOT USE alcohol-based disinfectants
on plastic surfaces.
CAUTION