15
CONCRETE MIXER
EN
ATTENTION!
Do not hit the mixing drum with rm objects (hammer, shovel, etc.).
It is necessary to immediately remove the remains of concrete and solution mixes from the teeth of the drive gear
wheel and the toothed rim.
ADJUSTING POSITIONS OF THE CONCRETE MIXER
For mixture For concrete
For cleaning For storage
TECHNICAL MAINTENANCE
Safe and long-lasting operation of the mixer depends on its correct operation and timely servicing. The maintenance
is made for the purpose of keeping the mixer in a working order. All works are performed by a strictly corresponding
tool which is purchased by the person servicing the concrete mixer.
The tool used for carrying out maintenance should be of an appropriate quality. In the course of maintenance
it is necessary to observe the standard safety code. Perform all works for the tightening of threaded connections,
lubrication and belt tensioning only when the concrete mixer is switched o, with the disconnected mains plug.
The maintenance involves shift-time and periodic servicing.
To Next Page
Loading...