5
CONCRETE MIXER
EN
Table 1.
Model Capacity, l
Components
Cement, kg Sand, l Ballast, l Water, l
DСМ-125 125 22,5 27 45 11
DСМ-160 160 30 36 60 15
DСМ-180 180 38 45 75 18
DСМ-200 200 40 50 80 19
Concrete mixers are not intended for use by persons with physical or intellectual disabilities or having no appropriate
experience and expertise unless such users are under control and have been instructed on the use of the device by
the person responsible for safety.
Use and maintenance of the concrete mixer is prohibited in condition of strong fatigue, under alcoholic, drug
intoxication or under the inuence of potent medical drugs reducing the speed of reexes and attention level.
Children and pets should be kept far away from the product during its operation. The user is responsible for accidents
or damage caused to other persons or their property. The user is responsible for the assessment of potential risks on
his/her working site, besides, he/she should take all precautions to ensure own safety and safety of people around.
DCM-125, DCM160, DCM180, DCM200 concrete mixers are intended for operation at ambient temperature from + 5
to + 40 °C, without of the exposure of the product to solar radiation and atmospheric precipitation, with a relative
air humidity up to 80% at a temperature of 25 °C. The concrete mixer is connected to a single-phase AC mains with a
solid-grounded neutral, with a voltage of 209−242 V, with a frequency of 50 ±1.25 Hz.
ATTENTION!
Concrete mixers are not intended for professional application.
Upon purchase of the concrete mixer check its working capacity and scope of supply. Request from the seller to ll in the
warranty card for the concrete mixer, granting the right for free elimination of factory defects during the warranty period. In
the document the seller should specify date of sale of the concrete mixer, put a stamp of the shop and sign the document.
SET
1. Motor house – 1 pc.
2. Handwheel – 1 pc.
3. Upside of tank - 1 pc.
4. Underpart – 1 pc.
5. Blade – 2 pcs.
6. Wheel – 2 pcs.
7. Spreader bar – 1 pc.
8. V-shaped clamp – 1 pc.
9. Frame – 1 pc.
10. Fixing set – 1 pc.
11. Wheel axle frame – 1 pc.
12. Stand – 1 pc.
13. Manual – 1 pc.
14. Pedal – 1 pc.
15. Gear – 1 pc.
To Next Page
Loading...