27
REMOVAL OF THE BATTERY
1. To disconnect, rst unscrew the
collar on the charger then pull the
connector out.
2. The battery can then be
remove. Don’t lift by the cables.
REMOVING REAR WHEEL ASSEMBLY FROM BODY
1. Twist spring clip outwards and
pull to remove from pin.
2. Lift up using the webbing
handle, this will disengage the
rear wheel assembly from the
body. You may need to apply
more force with the heel of
your hand to the rear wheel
assembly beam should it fail to
disengage readily.
change
To Next Page
Loading...
