26
REMOVING THE FOOTREST
Squeeze the spring mechanism to
disengage the footrest from the slots and
pull out.
REMOVING THE SEATING SYSTEM FROM THE BODY
1. Check the harness straps are fastened
within the seating system. Ensure all
connectors are detached from the sockets at
the rear of Wizzybug. Unhook the carer control
from the bar on the back of the headrest.
2. Unlock the white dial by turning fully
anti-clockwise.
3. Press down on the black seat release
knob (positioned above the white dial).
4. Lift the seat, guiding it free of the Wizzybug
body. Do not lift by the headrest. Lift only by
the white dial or the harness straps.
How to Disassemble Wizzybug
Fig 15 Removing the
footrest
To Next Page
Loading...