1
SECTION 1: PRODUCT DESCRIPTION
1.1 General
This instrument is a microprocessor based single loop controller capable of measuring,
displaying and controlling temperature, pressure, flow, and level from a variety of
inputs. Most outputs are easily tuned using the instrument Pre-Tune and Auto-Tune, or
RaPID (Response assisted PID) functions.
Control functions, alarm settings and other parameters are easily entered through the
front keypad. E
2
Technology (100 year life) protects against data loss during AC power
outages.
The input is user configurable to directly connect to either thermocouple, RTD, mVDC,
VDC or mADC inputs. The instrument can operate from either a 90-264 VAC, 50/60 HZ
power supply, or optional 24V AC/DC power supply.
Standard features include:
• Auto Tune
• Alarm Functions
• Auto/Manual Switching
• Process Retransmission
• Setpoint Retransmission
• Setpoint Ramp Rate
• Proportioning (Time or Current)/On-Off Control
• Single On-Off Control
• Single Time Proportioning Control
• Single Current Proportioning
Optional features include:
• Dual On-Off Control
• Dual Time Proportioning
• Dual Current Proportioning
• Dual Setpoint
• Remote Setpoint
• Digital Communications
• Alarm Outputs
To Next Page
Loading...
Need help?
General
